How To Make Harley Davidson Exhaust Quieter

That allows the exhaust to go directly through the baffle without having to go through any of the packing.

How to make harley davidson exhaust quieter. The material should be wrapped snugly without over-tightening to allow the exhaust gases to. Replace exhaust crush gaskets any time the exhaust pipes are removed. Drill through this one in the same way as the first then repeat the entire procedure for each remaining exhaust pipe.

If it turns out you dont like the sound you can just replace the stock yourself. If you dont have an O2 sensor on your pipes you can drill out the baffles. After much thinking I found 3 ways to make them quieter without choking the engine.

That quieted the exhaust quite a bit. The exhaust itself just doesnt hold enough air volume to accomplish a stock-like level of noise reduction. Quiet Baffles For Harley-Davidson EasyR Australia Call Us On 07 3216 2251.

Shop Quiet Baffles And Other Parts For Harley-Davidson Online With EasyR Australia. Push the drill bit further into the exhaust to locate the second baffle. Install a different muffler.

Make torque at WOT. New crush gaskets keep your exhaust quiet. This includes making sure your motorcycle has a well-functioning exhaust which can be customized.

Some people dont like the sound that this makes though and say it sounds like a rattly hollow sound. I packed 12 inch of glass stuffing between the inner and outer tube to seal the end of the inner tube and force the exhaust through the packing. Not all exhaust systems are super loud in fact most pipes that perform well have reasonable mufflers in them.